Draft
Conversation
… registered [ Upstream commit 5d56022 ] syzbot is still reporting unregister_netdevice: waiting for vcan0 to become free. Usage count = 2 even after commit 93a27b5 ("can: j1939: add missing calls in NETDEV_UNREGISTER notification handler") was added. A debug printk() patch found that j1939_session_activate() can succeed even after j1939_cancel_active_session() from j1939_netdev_notify(NETDEV_UNREGISTER) has completed. Since j1939_cancel_active_session() is processed with the session list lock held, checking ndev->reg_state in j1939_session_activate() with the session list lock held can reliably close the race window. Reported-by: syzbot <syzbot+881d65229ca4f9ae8c84@syzkaller.appspotmail.com> Closes: https://syzkaller.appspot.com/bug?extid=881d65229ca4f9ae8c84 Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/b9653191-d479-4c8b-8536-1326d028db5c@I-love.SAKURA.ne.jp Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ccb8a3c ] The PI tuple must be contained within the metadata value, so validate that pi_offset + pi_tuple_size <= metadata_size. This guards against block drivers that report invalid pi_offset values. Signed-off-by: Caleb Sander Mateos <csander@purestorage.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da3a7ef ] Maintenance patch for native DSD support. Add set of missing device and vendor quirks; TEAC, Esoteric, Luxman and Musical Fidelity. Signed-off-by: Jussi Laako <jussi@sonarnerd.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20251211152224.1780782-1-jussi@sonarnerd.net Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2cb8ef ] Add a DMI quirk for the Honor MagicBook X16 2025 laptop fixing the issue where the internal microphone was not detected. Signed-off-by: Andrew Elantsev <elantsew.andrew@gmail.com> Link: https://patch.msgid.link/20251210203800.142822-1-elantsew.andrew@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e64826e ] The ALC233 codec on these Medion NM14LNL (SPRCHRGD 14 S2) systems requires a quirk to enable all speakers. Tested-by: davplsm <davpal@yahoo.com> Link: thesofproject#5611 Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://patch.msgid.link/20251212174658.752641-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 90ed688 ] Drivers does cache sync during runtime resume, setting all writable registers. Not all writable registers are set in cache default, resulting in the erorr message: fsl-sai 30c30000.sai: using zero-initialized flat cache, this may cause unexpected behavior Fix this by adding missing writable register defaults. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://patch.msgid.link/20251216102246.676181-1-alexander.stein@ew.tq-group.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e16776 ] A race condition was found in sg_proc_debug_helper(). It was observed on a system using an IBM LTO-9 SAS Tape Drive (ULTRIUM-TD9) and monitoring /proc/scsi/sg/debug every second. A very large elapsed time would sometimes appear. This is caused by two race conditions. We reproduced the issue with an IBM ULTRIUM-HH9 tape drive on an x86_64 architecture. A patched kernel was built, and the race condition could not be observed anymore after the application of this patch. A reproducer C program utilising the scsi_debug module was also built by Changhui Zhong and can be viewed here: https://github.com/MichaelRabek/linux-tests/blob/master/drivers/scsi/sg/sg_race_trigger.c The first race happens between the reading of hp->duration in sg_proc_debug_helper() and request completion in sg_rq_end_io(). The hp->duration member variable may hold either of two types of information: #1 - The start time of the request. This value is present while the request is not yet finished. msm8226-mainline#2 - The total execution time of the request (end_time - start_time). If sg_proc_debug_helper() executes *after* the value of hp->duration was changed from #1 to msm8226-mainline#2, but *before* srp->done is set to 1 in sg_rq_end_io(), a fresh timestamp is taken in the else branch, and the elapsed time (value type msm8226-mainline#2) is subtracted from a timestamp, which cannot yield a valid elapsed time (which is a type msm8226-mainline#2 value as well). To fix this issue, the value of hp->duration must change under the protection of the sfp->rq_list_lock in sg_rq_end_io(). Since sg_proc_debug_helper() takes this read lock, the change to srp->done and srp->header.duration will happen atomically from the perspective of sg_proc_debug_helper() and the race condition is thus eliminated. The second race condition happens between sg_proc_debug_helper() and sg_new_write(). Even though hp->duration is set to the current time stamp in sg_add_request() under the write lock's protection, it gets overwritten by a call to get_sg_io_hdr(), which calls copy_from_user() to copy struct sg_io_hdr from userspace into kernel space. hp->duration is set to the start time again in sg_common_write(). If sg_proc_debug_helper() is called between these two calls, an arbitrary value set by userspace (usually zero) is used to compute the elapsed time. To fix this issue, hp->duration must be set to the current timestamp again after get_sg_io_hdr() returns successfully. A small race window still exists between get_sg_io_hdr() and setting hp->duration, but this window is only a few instructions wide and does not result in observable issues in practice, as confirmed by testing. Additionally, we fix the format specifier from %d to %u for printing unsigned int values in sg_proc_debug_helper(). Signed-off-by: Michal Rábek <mrabek@redhat.com> Suggested-by: Tomas Henzl <thenzl@redhat.com> Tested-by: Changhui Zhong <czhong@redhat.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Reviewed-by: John Meneghini <jmeneghi@redhat.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Link: https://patch.msgid.link/20251212160900.64924-1-mrabek@redhat.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d67396c ] A race condition exists between the read loop and IRQ `complete()` call. An interrupt could call the complete() between the inner loop and reinit_completion(), potentially losing the completion event and causing an unnecessary timeout. Moving reinit_completion() before the loop prevents this. A premature signal will only result in a spurious wakeup and another wait cycle, which is preferable to waiting for a timeout. Signed-off-by: Mateusz Litwin <mateusz.litwin@nokia.com> Link: https://patch.msgid.link/20251218-cqspi_indirect_read_improve-v2-1-396079972f2a@nokia.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Link: https://lore.kernel.org/r/20260115164202.305475649@linuxfoundation.org Tested-by: Ronald Warsow <rwarsow@gmx.de> Tested-by: Brett A C Sheffield <bacs@librecast.net> Tested-by: Slade Watkins <sr@sladewatkins.com> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com> Tested-by: Salvatore Bonaccorso <carnil@debian.org> Tested-by: Ron Economos <re@w6rz.net> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Peter Schneider <pschneider1968@googlemail.com> Tested-by: Mark Brown <broonie@kernel.org> Tested-by: Hardik Garg <hargar@linux.microsoft.com> Tested-by: Brett Mastbergen <bmastbergen@ciq.com> Tested-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ff3f991 upstream. mu_resource_id is referenced in imx_scu_irq_get_status() and imx_scu_irq_group_enable() which could be used by other modules, so need to set correct value before using imx_sc_irq_ipc_handle in SCU API call. Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Fixes: 81fb53f ("firmware: imx: scu-irq: Init workqueue before request mbox channel") Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d7f1b4b upstream. The return value calculation was incorrect: `return len - buf_size;` Initially `len = buf_size`, then `len` decreases with each operation. This results in a negative return value on success. Fix by returning `buf_size - len` which correctly calculates the actual number of bytes written. Fixes: a976d79 ("efi/cper: Add a new helper function to print bitmasks") Signed-off-by: Morduan Zang <zhangdandan@uniontech.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7d3fa7e upstream. After discussion with the devicetree maintainers we agreed to not extend lists with the generic compatible "apple,nvme-ans2" anymore [1]. Add "apple,t8103-nvme-ans2" as fallback compatible as it is the SoC the driver and bindings were written for. [1]: https://lore.kernel.org/asahi/12ab93b7-1fc2-4ce0-926e-c8141cfe81bf@kernel.org/ Cc: stable@vger.kernel.org # v6.18+ Fixes: 5bd2927 ("nvme-apple: Add initial Apple SoC NVMe driver") Reviewed-by: Neal Gompa <neal@gompa.dev> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Janne Grunau <j@jannau.net> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 469d715 upstream. This reverts commit 8a157e0. That commit incorrectly assumed that the bio_chain() arguments were swapped in gfs2. However, gfs2 intentionally constructs bio chains so that the first bio's bi_end_io callback is invoked when all bios in the chain have completed, unlike bio chains where the last bio's callback is invoked. Fixes: 8a157e0 ("gfs2: Fix use of bio_chain") Cc: stable@vger.kernel.org Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b45f721 upstream. When loading guest XSAVE state via KVM_SET_XSAVE, and when updating XFD in response to a guest WRMSR, clear XFD-disabled features in the saved (or to be restored) XSTATE_BV to ensure KVM doesn't attempt to load state for features that are disabled via the guest's XFD. Because the kernel executes XRSTOR with the guest's XFD, saving XSTATE_BV[i]=1 with XFD[i]=1 will cause XRSTOR to #NM and panic the kernel. E.g. if fpu_update_guest_xfd() sets XFD without clearing XSTATE_BV: ------------[ cut here ]------------ WARNING: arch/x86/kernel/traps.c:1524 at exc_device_not_available+0x101/0x110, CPU#29: amx_test/848 Modules linked in: kvm_intel kvm irqbypass CPU: 29 UID: 1000 PID: 848 Comm: amx_test Not tainted 6.19.0-rc2-ffa07f7fd437-x86_amx_nm_xfd_non_init-vm #171 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:exc_device_not_available+0x101/0x110 Call Trace: <TASK> asm_exc_device_not_available+0x1a/0x20 RIP: 0010:restore_fpregs_from_fpstate+0x36/0x90 switch_fpu_return+0x4a/0xb0 kvm_arch_vcpu_ioctl_run+0x1245/0x1e40 [kvm] kvm_vcpu_ioctl+0x2c3/0x8f0 [kvm] __x64_sys_ioctl+0x8f/0xd0 do_syscall_64+0x62/0x940 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> ---[ end trace 0000000000000000 ]--- This can happen if the guest executes WRMSR(MSR_IA32_XFD) to set XFD[18] = 1, and a host IRQ triggers kernel_fpu_begin() prior to the vmexit handler's call to fpu_update_guest_xfd(). and if userspace stuffs XSTATE_BV[i]=1 via KVM_SET_XSAVE: ------------[ cut here ]------------ WARNING: arch/x86/kernel/traps.c:1524 at exc_device_not_available+0x101/0x110, CPU#14: amx_test/867 Modules linked in: kvm_intel kvm irqbypass CPU: 14 UID: 1000 PID: 867 Comm: amx_test Not tainted 6.19.0-rc2-2dace9faccd6-x86_amx_nm_xfd_non_init-vm #168 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:exc_device_not_available+0x101/0x110 Call Trace: <TASK> asm_exc_device_not_available+0x1a/0x20 RIP: 0010:restore_fpregs_from_fpstate+0x36/0x90 fpu_swap_kvm_fpstate+0x6b/0x120 kvm_load_guest_fpu+0x30/0x80 [kvm] kvm_arch_vcpu_ioctl_run+0x85/0x1e40 [kvm] kvm_vcpu_ioctl+0x2c3/0x8f0 [kvm] __x64_sys_ioctl+0x8f/0xd0 do_syscall_64+0x62/0x940 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> ---[ end trace 0000000000000000 ]--- The new behavior is consistent with the AMX architecture. Per Intel's SDM, XSAVE saves XSTATE_BV as '0' for components that are disabled via XFD (and non-compacted XSAVE saves the initial configuration of the state component): If XSAVE, XSAVEC, XSAVEOPT, or XSAVES is saving the state component i, the instruction does not generate #NM when XCR0[i] = IA32_XFD[i] = 1; instead, it operates as if XINUSE[i] = 0 (and the state component was in its initial state): it saves bit i of XSTATE_BV field of the XSAVE header as 0; in addition, XSAVE saves the initial configuration of the state component (the other instructions do not save state component i). Alternatively, KVM could always do XRSTOR with XFD=0, e.g. by using a constant XFD based on the set of enabled features when XSAVEing for a struct fpu_guest. However, having XSTATE_BV[i]=1 for XFD-disabled features can only happen in the above interrupt case, or in similar scenarios involving preemption on preemptible kernels, because fpu_swap_kvm_fpstate()'s call to save_fpregs_to_fpstate() saves the outgoing FPU state with the current XFD; and that is (on all but the first WRMSR to XFD) the guest XFD. Therefore, XFD can only go out of sync with XSTATE_BV in the above interrupt case, or in similar scenarios involving preemption on preemptible kernels, and it we can consider it (de facto) part of KVM ABI that KVM_GET_XSAVE returns XSTATE_BV[i]=0 for XFD-disabled features. Reported-by: Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Fixes: 820a6ee ("kvm: x86: Add emulation for IA32_XFD", 2022-01-14) Signed-off-by: Sean Christopherson <seanjc@google.com> [Move clearing of XSTATE_BV from fpu_copy_uabi_to_guest_fpstate to kvm_vcpu_ioctl_x86_set_xsave. - Paolo] Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6a06987 upstream. On 32-bit ARM, you may encounter linker errors such as this one: ld.lld: error: undefined symbol: _find_next_zero_bit >>> referenced by rust_binder_main.43196037ba7bcee1-cgu.0 >>> drivers/android/binder/rust_binder_main.o:(<rust_binder_main::process::Process>::insert_or_update_handle) in archive vmlinux.a >>> referenced by rust_binder_main.43196037ba7bcee1-cgu.0 >>> drivers/android/binder/rust_binder_main.o:(<rust_binder_main::process::Process>::insert_or_update_handle) in archive vmlinux.a This error occurs because even though the functions are declared by include/linux/find.h, the definition is #ifdef'd out on 32-bit ARM. This is because arch/arm/include/asm/bitops.h contains: #define find_first_zero_bit(p,sz) _find_first_zero_bit_le(p,sz) #define find_next_zero_bit(p,sz,off) _find_next_zero_bit_le(p,sz,off) #define find_first_bit(p,sz) _find_first_bit_le(p,sz) #define find_next_bit(p,sz,off) _find_next_bit_le(p,sz,off) And the underscore-prefixed function is conditional on #ifndef of the non-underscore-prefixed name, but the declaration in find.h is *not* conditional on that #ifndef. To fix the linker error, we ensure that the symbols in question exist when compiling Rust code. We do this by defining them in rust/helpers/ whenever the normal definition is #ifndef'd out. Note that these helpers are somewhat unusual in that they do not have the rust_helper_ prefix that most helpers have. Adding the rust_helper_ prefix does not compile, as 'bindings::_find_next_zero_bit()' will result in a call to a symbol called _find_next_zero_bit as defined by include/linux/find.h rather than a symbol with the rust_helper_ prefix. This is because when a symbol is present in both include/ and rust/helpers/, the one from include/ wins under the assumption that the current configuration is one where that helper is unnecessary. This heuristic fails for _find_next_zero_bit() because the header file always declares it even if the symbol does not exist. The functions still use the __rust_helper annotation. This lets the wrapper function be inlined into Rust code even if full kernel LTO is not used once the patch series for that feature lands. Yury: arches are free to implement they own find_bit() functions. Most rely on generic implementation, but arm32 and m86k - not; so they require custom handling. Alice confirmed it fixes the build for both. Cc: stable@vger.kernel.org Fixes: 6cf93a9 ("rust: add bindings for bitops.h") Reported-by: Andreas Hindborg <a.hindborg@kernel.org> Closes: https://rust-for-linux.zulipchat.com/#narrow/channel/x/topic/x/near/561677301 Tested-by: Andreas Hindborg <a.hindborg@kernel.org> Reviewed-by: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Alice Ryhl <aliceryhl@google.com> Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 120f3e6 upstream. The soundwire update_status() callback may be called multiple times with the same ATTACHED status but initialisation should only be done when transitioning from UNATTACHED to ATTACHED. Fix the inverted hw_init flag which was set to false instead of true after initialisation which defeats its purpose and may result in repeated unnecessary initialisation. Similarly, the initial state of the flag was also inverted so that the codec would only be initialised and brought out of regmap cache only mode if its status first transitions to UNATTACHED. Fixes: aa21a7d ("ASoC: codecs: wsa884x: Add WSA884x family of speakers") Cc: stable@vger.kernel.org # 6.5 Cc: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com> Link: https://patch.msgid.link/20260102111413.9605-4-johan@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 49aadf8 upstream. The soundwire update_status() callback may be called multiple times with the same ATTACHED status but initialisation should only be done when transitioning from UNATTACHED to ATTACHED. This avoids repeated initialisation of the codecs during boot of machines like the Lenovo ThinkPad X13s: [ 11.614523] wsa883x-codec sdw:1:0:0217:0202:00:1: WSA883X Version 1_1, Variant: WSA8835_V2 [ 11.618022] wsa883x-codec sdw:1:0:0217:0202:00:1: WSA883X Version 1_1, Variant: WSA8835_V2 [ 11.621377] wsa883x-codec sdw:1:0:0217:0202:00:1: WSA883X Version 1_1, Variant: WSA8835_V2 [ 11.624065] wsa883x-codec sdw:1:0:0217:0202:00:1: WSA883X Version 1_1, Variant: WSA8835_V2 [ 11.631382] wsa883x-codec sdw:1:0:0217:0202:00:2: WSA883X Version 1_1, Variant: WSA8835_V2 [ 11.634424] wsa883x-codec sdw:1:0:0217:0202:00:2: WSA883X Version 1_1, Variant: WSA8835_V2 Fixes: 43b8c7d ("ASoC: codecs: add wsa883x amplifier support") Cc: stable@vger.kernel.org # 6.0 Cc: Srinivas Kandagatla <srini@kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com> Link: https://patch.msgid.link/20260102111413.9605-2-johan@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dc2d5dd upstream. On disconnect drm_atomic_helper_disable_all() is called which sets both the fb and crtc for a plane to NULL before invoking a commit. This causes a kernel oops on every display disconnect. Add guards for those dereferences. Cc: <stable@vger.kernel.org> # 6.18.x Fixes: 73cfd16 ("drm/gud: Replace simple display pipe with DRM atomic helpers") Signed-off-by: Shenghao Yang <me@shenghaoyang.info> Reviewed-by: Ruben Wauters <rubenru09@aol.com> Signed-off-by: Ruben Wauters <rubenru09@aol.com> Link: https://patch.msgid.link/20251231055039.44266-1-me@shenghaoyang.info Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4156c37 upstream. Use the new TRAILING_OVERLAP() helper to fix a misalignment bug along with the following warning: drivers/net/virtio_net.c:429:46: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] This helper creates a union between a flexible-array member (FAM) and a set of members that would otherwise follow it (in this case `u8 rss_hash_key_data[VIRTIO_NET_RSS_MAX_KEY_SIZE];`). This overlays the trailing members (rss_hash_key_data) onto the FAM (hash_key_data) while keeping the FAM and the start of MEMBERS aligned. The static_assert() ensures this alignment remains. Notice that due to tail padding in flexible `struct virtio_net_rss_config_trailer`, `rss_trailer.hash_key_data` (at offset 83 in struct virtnet_info) and `rss_hash_key_data` (at offset 84 in struct virtnet_info) are misaligned by one byte. See below: struct virtio_net_rss_config_trailer { __le16 max_tx_vq; /* 0 2 */ __u8 hash_key_length; /* 2 1 */ __u8 hash_key_data[]; /* 3 0 */ /* size: 4, cachelines: 1, members: 3 */ /* padding: 1 */ /* last cacheline: 4 bytes */ }; struct virtnet_info { ... struct virtio_net_rss_config_trailer rss_trailer; /* 80 4 */ /* XXX last struct has 1 byte of padding */ u8 rss_hash_key_data[40]; /* 84 40 */ ... /* size: 832, cachelines: 13, members: 48 */ /* sum members: 801, holes: 8, sum holes: 31 */ /* paddings: 2, sum paddings: 5 */ }; After changes, those members are correctly aligned at offset 795: struct virtnet_info { ... union { struct virtio_net_rss_config_trailer rss_trailer; /* 792 4 */ struct { unsigned char __offset_to_hash_key_data[3]; /* 792 3 */ u8 rss_hash_key_data[40]; /* 795 40 */ }; /* 792 43 */ }; /* 792 44 */ ... /* size: 840, cachelines: 14, members: 47 */ /* sum members: 801, holes: 8, sum holes: 35 */ /* padding: 4 */ /* paddings: 1, sum paddings: 4 */ /* last cacheline: 8 bytes */ }; As a result, the RSS key passed to the device is shifted by 1 byte: the last byte is cut off, and instead a (possibly uninitialized) byte is added at the beginning. As a last note `struct virtio_net_rss_config_hdr *rss_hdr;` is also moved to the end, since it seems those three members should stick around together. :) Cc: stable@vger.kernel.org Fixes: ed3100e ("virtio_net: Use new RSS config structs") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://patch.msgid.link/aWIItWq5dV9XTTCJ@kspp Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit da579f0 upstream. With IORING_SETUP_DEFER_TASKRUN, task work is queued to ctx->work_llist (local work) rather than the fallback list. During io_ring_exit_work(), io_move_task_work_from_local() was called once before the cancel loop, moving work from work_llist to fallback_llist. However, task work can be added to work_llist during the cancel loop itself. There are two cases: 1) io_kill_timeouts() is called from io_uring_try_cancel_requests() to cancel pending timeouts, and it adds task work via io_req_queue_tw_complete() for each cancelled timeout: 2) URING_CMD requests like ublk can be completed via io_uring_cmd_complete_in_task() from ublk_queue_rq() during canceling, given ublk request queue is only quiesced when canceling the 1st uring_cmd. Since io_allowed_defer_tw_run() returns false in io_ring_exit_work() (kworker != submitter_task), io_run_local_work() is never invoked, and the work_llist entries are never processed. This causes io_uring_try_cancel_requests() to loop indefinitely, resulting in 100% CPU usage in kworker threads. Fix this by moving io_move_task_work_from_local() inside the cancel loop, ensuring any work on work_llist is moved to fallback before each cancel attempt. Cc: stable@vger.kernel.org Fixes: c0e0d6b ("io_uring: add IORING_SETUP_DEFER_TASKRUN") Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3d5221a ] Commit 61fafbe ("xfrm: Determine inner GSO type from packet inner protocol") attempted to fix GSO segmentation by reading the inner protocol from XFRM_MODE_SKB_CB(skb)->protocol. This was incorrect because the field holds the inner L4 protocol (TCP/UDP) instead of the required tunnel protocol. Also, the memory location (shared by XFRM_SKB_CB(skb) which could be overwritten by xfrm_replay_overflow()) is prone to corruption. This combination caused the kernel to select the wrong inner mode and get the wrong address family. The correct value is in xfrm_offload(skb)->proto, which is set from the outer tunnel header's protocol field by esp[4|6]_gso_encap(). It is initialized by xfrm[4|6]_tunnel_encap_add() to either IPPROTO_IPIP or IPPROTO_IPV6, using xfrm_af2proto() and correctly reflects the inner packet's address family. Fixes: 61fafbe ("xfrm: Determine inner GSO type from packet inner protocol") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c196def ] The XFRM_STATE_NOPMTUDISC flag is only meaningful for output SAs, but it was being applied regardless of the SA direction when the sysctl ip_no_pmtu_disc is enabled. This can unintentionally affect input SAs. Limit setting XFRM_STATE_NOPMTUDISC to output SAs when the SA direction is configured. Closes: strongswan/strongswan#2946 Fixes: a4a87fa ("xfrm: Add Direction to the SA in or out") Signed-off-by: Antony Antony <antony.antony@secunet.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 857bf90 ] Ben Coddington reports seeing a hang in the following stack trace: 0 [ffffd0b50e1774e0] __schedule at ffffffff9ca05415 1 [ffffd0b50e177548] schedule at ffffffff9ca05717 2 [ffffd0b50e177558] bit_wait at ffffffff9ca061e1 3 [ffffd0b50e177568] __wait_on_bit at ffffffff9ca05cfb 4 [ffffd0b50e1775c8] out_of_line_wait_on_bit at ffffffff9ca05ea5 5 [ffffd0b50e177618] pnfs_roc at ffffffffc154207b [nfsv4] 6 [ffffd0b50e1776b8] _nfs4_proc_delegreturn at ffffffffc1506586 [nfsv4] 7 [ffffd0b50e177788] nfs4_proc_delegreturn at ffffffffc1507480 [nfsv4] 8 [ffffd0b50e1777f8] nfs_do_return_delegation at ffffffffc1523e41 [nfsv4] 9 [ffffd0b50e177838] nfs_inode_set_delegation at ffffffffc1524a75 [nfsv4] 10 [ffffd0b50e177888] nfs4_process_delegation at ffffffffc14f41dd [nfsv4] 11 [ffffd0b50e1778a0] _nfs4_opendata_to_nfs4_state at ffffffffc1503edf [nfsv4] 12 [ffffd0b50e1778c0] _nfs4_open_and_get_state at ffffffffc1504e56 [nfsv4] 13 [ffffd0b50e177978] _nfs4_do_open at ffffffffc15051b8 [nfsv4] 14 [ffffd0b50e1779f8] nfs4_do_open at ffffffffc150559c [nfsv4] 15 [ffffd0b50e177a80] nfs4_atomic_open at ffffffffc15057fb [nfsv4] 16 [ffffd0b50e177ad0] nfs4_file_open at ffffffffc15219be [nfsv4] 17 [ffffd0b50e177b78] do_dentry_open at ffffffff9c09e6ea 18 [ffffd0b50e177ba8] vfs_open at ffffffff9c0a082e 19 [ffffd0b50e177bd0] dentry_open at ffffffff9c0a0935 The issue is that the delegreturn is being asked to wait for a layout return that cannot complete because a state recovery was initiated. The state recovery cannot complete until the open() finishes processing the delegations it was given. The solution is to propagate the existing flags that indicate a non-blocking call to the function pnfs_roc(), so that it knows not to wait in this situation. Reported-by: Benjamin Coddington <bcodding@hammerspace.com> Fixes: 29ade5d ("pNFS: Wait on outstanding layoutreturns to complete in pnfs_roc()") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cce0be6 ] Wang Zhaolong reports a deadlock involving NFSv4.1 state recovery waiting on kthreadd, which is attempting to reclaim memory by calling nfs_release_folio(). The latter cannot make progress due to state recovery being needed. It seems that the only safe thing to do here is to kick off a writeback of the folio, without waiting for completion, or else kicking off an asynchronous commit. Reported-by: Wang Zhaolong <wangzhaolong@huaweicloud.com> Fixes: 96780ca ("NFS: fix up nfs_release_folio() to try to release the page") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c72808 ] In nfs4_ff_alloc_deviceid_node(), if the allocation for ds_versions fails, the function jumps to the out_scratch label without freeing the already allocated dsaddrs list, leading to a memory leak. Fix this by jumping to the out_err_drain_dsaddrs label, which properly frees the dsaddrs list before cleaning up other resources. Fixes: d67ae82 ("pnfs/flexfiles: Add the FlexFile Layout Driver") Signed-off-by: Zilin Guan <zilin@seu.edu.cn> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a74af5 ] In bl_parse_scsi(), if the block device length is zero, the function returns immediately without releasing the file reference obtained via bl_open_path(), leading to a memory leak. Fix this by jumping to the out_blkdev_put label to ensure the file reference is properly released. Fixes: d76c769 ("pnfs/blocklayout: Don't add zero-length pnfs_block_dev") Signed-off-by: Zilin Guan <zilin@seu.edu.cn> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 14adddc ] After resume from suspend to RAM, the following splash is generated if the HDMI driver is probed (independent of a connected cable): [ 1194.484052] irq 80: nobody cared (try booting with the "irqpoll" option) [ 1194.484074] CPU: 0 UID: 0 PID: 627 Comm: rtcwake Not tainted 6.17.0-rc7-g96f1a11414b3 #1 PREEMPT [ 1194.484082] Hardware name: Rockchip RK3576 EVB V10 Board (DT) [ 1194.484085] Call trace: [ 1194.484087] ... (stripped) [ 1194.484283] handlers: [ 1194.484285] [<00000000bc363dcb>] dw_hdmi_qp_main_hardirq [dw_hdmi_qp] [ 1194.484302] Disabling IRQ #80 Apparently the HDMI IP is losing part of its state while the system is suspended and generates spurious interrupts during resume. The bug has not yet been noticed, as system suspend does not yet work properly on upstream kernel with either the Rockchip RK3588 or RK3576 platform. Fixes: 128a9bf ("drm/rockchip: Add basic RK3588 HDMI output support") Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patch.msgid.link/20251014-rockchip-hdmi-suspend-fix-v1-1-983fcbf44839@collabora.com Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9186fa ] HW version 10 does not have GB Surfaces so there is no backing buffer for surface backed FBs. This would result in a nullptr dereference and crash the driver causing a black screen. Fixes: 9655441 ("drm/vmwgfx: Refactor cursor handling") Signed-off-by: Ian Forbes <ian.forbes@broadcom.com> Reviewed-by: Zack Rusin <zack.rusin@broadcom.com> Signed-off-by: Zack Rusin <zack.rusin@broadcom.com> Link: https://patch.msgid.link/20251114203703.1946616-1-ian.forbes@broadcom.com Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 37a0cff ] Some of the warnings need to be reordered between these two functions in order to be correct. This has happened multiple times. Merging them solves this problem once and for all. Fixes: d6667f0 ("drm/vmwgfx: Fix handling of dumb buffers") Signed-off-by: Ian Forbes <ian.forbes@broadcom.com> Signed-off-by: Zack Rusin <zack.rusin@broadcom.com> Link: https://patch.msgid.link/20260107152059.3048329-1-ian.forbes@broadcom.com Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 60699ab ] When resending requests, etc, the page base can quickly grow larger than the page size. Fixes: 091bdcf ("nfs/localio: refactor iocb and iov_iter_bvec initialization") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Reviewed-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
HDP status for DisplayPort alt-mode is signaled data_status. Track changes to have a debounced HPD to forward to the DRM KMS driver. Signed-off-by: Janne Grunau <j@jannau.net>
This is not how dp-altmode support should be implemented but it works for new. Requires a "displayport" property in the connector node with a phandle of the connector. Signed-off-by: Janne Grunau <j@jannau.net>
Enable DP alt mode for all M1 devices: - Mac Mini (M1): USB-C port next to the HDMI port - Macbook Pro (M1, 13-inch): front left USB-C port - Macbook Air (M1, 13-inch): front left USB-C port - iMac (M1, 2 USB-C ports): back left USB-C port - iMac (M1, 4 USB-C ports): back right middle USB-C port Signed-off-by: Janne Grunau <j@jannau.net>
Works around missing suspend/resume handling in ATC phy for DP-altmode. Signed-off-by: Janne Grunau <j@jannau.net>
Enable DP alt mode for the front left USB-C port of Macbook Air 13 (M2, 13/15-inch) and Macbook Pro (M2, 13-inch). Can't easily enabled on on the M2 Mac Mini since dcpext is used for the HDMI port and dcp bringup is troublesome. Signed-off-by: Janne Grunau <j@jannau.net>
Works around missing suspend/resume handling in ATC phy for DP-altmode. Signed-off-by: Janne Grunau <j@jannau.net>
Needs more testing, maybe a little unstable and somehow limits the HDMI out to 1280x720 (to be verified). Using dcp as display coproc since dcpext is used for the HDMI port. Signed-off-by: Janne Grunau <j@jannau.net>
Works around missing suspend/resume handling in ATC phy for DP-altmode. Signed-off-by: Janne Grunau <j@jannau.net>
Blessed dp-altmode port is front left port on j314/j316/j414/j416. Signed-off-by: Janne Grunau <j@jannau.net>
…ways on Works around missing suspend/resume handling in ATC phy for DP-altmode. Signed-off-by: Janne Grunau <j@jannau.net>
DP alt mode for Mac Studio, the blessed port is the back left middle port (second closest USB-C port to the power connector). Signed-off-by: Janne Grunau <j@jannau.net>
…s on Works around missing suspend/resume handling in ATC phy for DP-altmode. Signed-off-by: Janne Grunau <j@jannau.net>
DP alt mode for Mac Mini M2 Pro, the blessed port is the back right middle port (second closest USB-C port to the power connector). Signed-off-by: Janne Grunau <j@jannau.net>
This enables setting up sio node. &sio required by apple dcp audio Signed-off-by: Vasiliy Doylov <nekocwd@mainlining.org>
Author
|
Some testing on format hardcode: This wireplumber config results in stable sound on 1/5 pipewire restarts |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
20 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
This enables audio via DP alt mode on t8103 based devices
Tested on macbook air m1 (j313) with LG tv
TV EDID
Decoded EDID
HDMI audio woks unpredictable, but there are some general tips:
Some things to test (can improve stability):
Tracker: #364