nvme-cli and libnvme

NVM-Express user space tooling for Linux.

For more information on the NVM Express standard, see https://nvmexpress.org.

Subscribe to linux-nvme@lists.infradead.org for Linux NVMe discussions and development. The list is archived at https://lists.infradead.org/mailman/listinfo/linux-nvme

nvme-cli:

libnvme:

Build from source

nvme-cli uses meson as its build system. There is more than one way to configure and build the project to accommodate environments with an older version of meson.

A minimal build requires:

• gcc (or clang)
• ninja
• meson

If you build on a relatively modern system, either use meson directly or the Makefile wrapper.

Older distros may ship an outdated version of meson. In this case, it's possible to build the project using samurai and muon. Both build tools have only a minimal dependency on the build environment. To ease this step, there is a build script which helps to setup a build environment.

nvme-cli dependencies (3.x and later):

Starting with nvme-cli 3.x, the libnvme library is fully integrated into the nvme-cli source tree. There is no longer any dependency on an external libnvme repository or package. All required libnvme and libnvme-mi code is included and built as part of nvme-cli.

Library	Dependency	Notes
libnvme, libnvme-mi	integrated	No external dependency, included in nvme-cli
json-c	optional	Recommended; without it, all plugins are disabled and json-c output format is disabled

Optional feature dependencies

The following optional libraries unlock additional features. Each can be explicitly enabled (-Doption=enabled) or disabled (-Doption=disabled); the default is auto (use if found) unless noted otherwise.

Option	Default	Feature unlocked
json-c	auto	/etc/nvme/config.json parsing; all vendor plugins; JSON output format
openssl	auto	TLS over NVMe-TCP; host authentication
keyutils	auto	Key management for NVMe-oF authentication
libdbus	disabled	End-point discovery for NVMe-MI
liburing	disabled	Get-log-page via io_uring passthrough
python	auto	Python bindings for libnvme

Example: explicitly disable Python bindings:

$ meson setup .build -Dpython=disabled

Options specific to nvme-cli are defined in meson_options.txt. To see the full list of available options, including meson built-ins:

$ meson configure .build

Build with meson

Configuring

No special configuration is required for libnvme, as it is now part of the nvme-cli source tree. Simply run:

$ meson setup .build

With meson's --wrap-mode argument it's possible to control if additional dependencies should be resolved. The options are:

--wrap-mode {default,nofallback,nodownload,forcefallback,nopromote}

Note for nvme-cli the 'default' is set to nofallback.

Building

$ meson compile -C .build

Installing

# meson install -C .build

To build a static library instead of a shared one:

$ meson setup --default-library=static .build

Running unit tests

$ meson test -C .build

Installation paths

By default, meson installs everything under /usr/local (executables in /usr/local/bin, libraries in /usr/local/lib, configuration in /usr/local/etc, etc.). This is controlled by two meson built-in options whose defaults are set in meson.build:

Option	Default
--prefix	/usr/local
--sysconfdir	etc (relative to prefix → /usr/local/etc)

To install into the standard system locations that a Linux distribution would use (/usr/bin, /usr/lib, /etc, …), pass these options at configure time:

$ meson setup .build --prefix /usr --sysconfdir /etc

Optionally add --buildtype release to disable debug symbols and enable optimizations for a production install:

$ meson setup .build --prefix /usr --sysconfdir /etc --buildtype release

Debug and sanitizer builds

To configure a build for debugging (optimizations off, debug symbols on):

$ meson setup .build --buildtype=debug

To enable address sanitizer (detects memory errors at runtime):

$ meson setup .build -Db_sanitize=address

When using the sanitizer, libasan.so must be preloaded if you encounter linking issues:

$ meson setup .build -Db_sanitize=address && \
  LD_PRELOAD=/lib64/libasan.so.6 ninja -C .build test

The undefined behavior sanitizer is also supported: -Db_sanitize=undefined. To enable both: -Db_sanitize=address,undefined.

Build with build.sh wrapper

The scripts/build.sh is used for the CI build but can also be used for configuring and building the project.

Running scripts/build.sh without any argument builds the project in the default configuration (meson, gcc and defaults)

It's possible to change the compiler to clang

scripts/build.sh -c clang

or enable all the fallbacks

scripts/build.sh fallback

Minimal static build with muon

scripts/build.sh -m muon will download and build samurai and muon instead of using meson to build the project. This reduces the dependency on the build environment to:

• gcc
• make
• git

Furthermore, this configuration will produce a static binary.

Build with Makefile wrapper

There is a Makefile wrapper for meson for backwards compatibility

$ make
# make install

Note: In previous versions, libnvme needed to be installed by hand. This is no longer required in nvme-cli 3.x and later.

RPM build support via Makefile that uses meson

$ make rpm

Static binary (no dependency) build support via Makefile that uses meson

$ make static

If you are not sure how to use it, find the top-level documentation with:

$ man nvme

Or find a short summary with:

$ nvme help

Building with specific plugins

By default, all vendor plugins are built. To build only specific plugins, use the plugins option:

$ meson setup .build -Dplugins=intel,wdc,ocp
$ meson compile -C .build

Or with the Makefile wrapper:

$ make PLUGINS="intel,wdc,ocp"

When PLUGINS is not used, the value defaults to all, which selects all plugins:

$ make PLUGINS="all"

To build without any vendor plugins:

$ make PLUGINS=""

Distro Support

It is available on many popular distributions (Alpine, Arch, Debian, Fedora, FreeBSD, Gentoo, Ubuntu, Nix(OS), openSUSE, ...) and the usual package name is nvme-cli.

OpenEmbedded/Yocto

An nvme-cli recipe is available as part of the meta-openembedded layer collection.

Buildroot

nvme-cli is available as a buildroot package. The package is named nvme.

Dependency

libnvme depends on the /sys/class/nvme-subsystem interface which was introduced in Linux kernel v4.15. nvme-cli requires kernel v4.15 or later.

Contributing

For information on adding commands, adding plugins, API naming conventions, commit guidelines, and the pull request workflow, see CONTRIBUTING.md.

Persistent and volatile configuration

Persistent configurations can be stored in two different locations: either in the file /etc/nvme/discovery.conf using the old style, or in the file /etc/nvme/config.json using the new style.

On the other hand, volatile configurations, such as those obtained from third-party tools like nvme-stats or blktests, can be stored in the /run/nvme directory. When using the nvme-cli tool, all these configurations are combined into a single configuration that is used as input.

The volatile configuration is particularly useful for coordinating access to the global resources among various components. For example, when executing blktests for the FC transport, the nvme-cli udev rules can be triggered. To prevent interference with a test, blktests can create a JSON configuration file in /run/nvme to inform nvme-cli that it should not perform any actions triggered from the udev context. This behavior can be controlled using the --context argument.

For example, a blktests volatile configuration could look like:

[
  {
    "hostnqn": "nqn.2014-08.org.nvmexpress:uuid:242d4a24-2484-4a80-8234-d0169409c5e8",
    "hostid": "242d4a24-2484-4a80-8234-d0169409c5e8",
    "subsystems": [
      {
	"application": "blktests",
        "nqn": "blktests-subsystem-1",
        "ports": [
          {
            "transport": "fc",
	    "traddr": "nn-0x10001100aa000001:pn-0x20001100aa000001",
	    "host_traddr": "nn-0x10001100aa000002:pn-0x20001100aa000002"
          }
        ]
      }
    ]
  }
]

Note when updating the volatile configuration during runtime, it should be done in an atomic way. For example, create a temporary file without the .json file extension in /run/nvme and write the contents to this file. When finished, use rename to add the .json file name extension. This ensures nvme-cli only sees the complete file.

Testing and CI

For pre-built binaries, CI build reproduction, and container-based debugging, see TESTING.md.